Skip to content
Tutorials Center
My learning

Topics

Lesson 11 of 36 ยท Shapes and Paths

The Pen Tool and Anchor Points

Learn how the Illustrator Pen tool draws straight and curved paths: corner and smooth anchor points, closing paths, the Curvature tool and the most common mistakes.

The Pen tool (P) is the heart of Illustrator. It lets you draw any shape you can imagine, one anchor point at a time. It feels awkward for the first hour and natural after a week of practice. This lesson gives you the mental model and the routine.

Paths and anchor points

A path is a chain of anchor points joined by segments. A segment can be a straight line or a curve. A path can be:

  • Open: it has a start and an end (a line or a curve).
  • Closed: the last point connects to the first (a shape).

Illustrator has two kinds of anchor points:

  • Corner points: the path changes direction sharply, or has handles that move independently.
  • Smooth points: the path flows through the point, with two handles that line up.

Drawing with the Pen tool

Straight segments

  1. Select the Pen tool (P) with a fill of none and a visible stroke, so you can see the line.
  2. Click to place the first anchor, move, and click again. A straight line appears.
  3. Keep clicking to add more points. Shift constrains to multiples of 45 degrees.
  4. To finish an open path, press Enter, or Ctrl/Cmd + click on empty space, or choose another tool.
  5. To close a shape, click the first anchor point (a small circle appears next to the cursor).

Curved segments

  1. Click and drag instead of clicking. The drag pulls out direction handles that control the curve.
  2. Drag in the direction you want the path to travel.
  3. Place the next point the same way. Two drags create an S-curve or an arc depending on the direction.

A good rule: put anchor points at the extremes of a curve (top, bottom, left, right) and keep their handles horizontal or vertical. Fewer points mean smoother, cleaner paths.

Modifier keys while drawing

Key Effect
Shift Constrain angle (45 degrees)
Alt/Option Break the handles: change direction at the point
Ctrl/Cmd Temporarily switch to Direct Selection to move a point
Space Reposition the point while placing it

When the Pen tool hovers over an existing path, the cursor shows a plus (add a point) or minus (delete a point). Over an end point, it shows a slash to continue the path.

Curvature tool

The Curvature tool (Shift + ~) is a friendlier pen for smooth curves. Just click points and Illustrator calculates a smooth curve through them. Double-click a point to toggle between smooth and corner. It is excellent for beginners, but experienced designers generally master the Pen for full control.

Anchor Point tool and menu commands

  • Anchor Point tool (Shift + C): click a smooth point to turn it into a corner; click and drag a corner to pull handles out.
  • Add Anchor Point (+) and Delete Anchor Point (-) tools, or Object > Path > Add Anchor Points.
  • The Control/Properties panel offers Convert selected anchor points to corner/smooth.
  • Object > Path > Simplify removes unnecessary points while keeping the shape.

Aim for as few points as possible. A circle needs four, a leaf maybe three. Extra points create lumpy curves that are hard to edit.

Counting points

Because more points means more problems, you can estimate how complex a path is. This stand-in models a path and flags suspicious density.

JS Stand-in: path point audit

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Practice routine

Draw these on a blank artboard, using as few points as you can:

  1. A triangle and a five-point star (clicks only).
  2. A circle with four points and drag-and-release handles.
  3. A heart, using three points: one at the bottom tip and one at each lobe.
  4. An S-curve with two drags.
  5. A wave line with alternating handle directions.

For tracing practice, place a reference image on a locked layer (Layers) at reduced opacity and draw over it with the Pen.

Walking through a path

An open path is just an ordered list, and a closed path adds a final segment back to the start. The next stand-in turns a list of points into the segments the Pen tool would create.

JS Stand-in: segments from points

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Common mistakes

  • Too many points: pulling long curves out of tiny segments.
  • Handles too long or too short: a handle about a third of the segment length is a good starting point.
  • Forgetting to close: shapes with a gap cannot be filled correctly or used in Pathfinder.
  • Starting a new path accidentally instead of continuing one: hover over an end point until you see the slash cursor.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What do you do to draw a curved segment with the Pen tool?

    Dragging creates direction handles that bend the segment.
  2. 2. How do you close a path?

    Clicking the start point connects the last anchor to the first.
  3. 3. Where should you generally place anchor points on a curve?

    Extremes give the smoothest curves with the fewest points.
  4. 4. How many segments does a closed path of 5 points have?

    A closed path has as many segments as points.

Summary

  • Paths are anchor points joined by segments; they can be open or closed.
  • Click makes corners; click and drag makes curves with handles.
  • Use extremes and few points; the Curvature tool is a gentle starting point.
  • Shift, Alt/Option and Ctrl/Cmd modify behaviour while drawing.

Next: Bezier Curves and Handles Explained