Skip to content
Tutorials Center
My learning

Topics

Lesson 7 of 36 ยท Signals and Classification

Even, Odd and Periodic Signals

Decompose any signal into even and odd parts, test for periodicity, compute the fundamental period of sums of sinusoids, and handle discrete-time periodicity.

Symmetry and repetition are the two structural properties that make signals easy to analyze. A symmetric signal needs half the work; a periodic signal can be described by one cycle. This lesson shows how to test for each property and how to split a signal into symmetric pieces.

Even and odd signals

  • Even: x(-t) = x(t). The graph is a mirror image about the vertical axis. Examples: cos(w t), t^2, a centred rectangle.
  • Odd: x(-t) = -x(t). The graph is rotated by 180 degrees about the origin. Examples: sin(w t), t, t^3. An odd signal must pass through zero at t = 0 (if it is defined there).

The same definitions hold in discrete time with x[-n].

Products follow sign rules just like numbers: even times even is even, odd times odd is even, even times odd is odd. The integral of an odd signal over a symmetric interval [-a, a] is zero, and for an even signal it is twice the integral over [0, a]. The Fourier series and transform use both facts to save work.

Even-odd decomposition

Every signal is the sum of an even part and an odd part:

  • x_e(t) = ( x(t) + x(-t) ) / 2
  • x_o(t) = ( x(t) - x(-t) ) / 2

and x(t) = x_e(t) + x_o(t). For e^(t) the even part is cosh(t) and the odd part is sinh(t).

Python Splitting a signal into even and odd parts

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Periodic signals

A continuous-time signal is periodic if there is T > 0 such that x(t + T) = x(t) for all t. The smallest such T is the fundamental period T0. Every multiple 2 T0, 3 T0, ... is also a period but not the fundamental one. A constant signal is periodic with every T, so it has no fundamental period.

A sinusoid cos(2 pi f t) has period T0 = 1/f.

Sum of periodic signals

The sum of two periodic signals with periods T1 and T2 is periodic only if the ratio T1 / T2 is a rational number p / q (in lowest terms). Then the fundamental period is T0 = q T1 = p T2, the smallest time that holds a whole number of cycles of both.

Example: x(t) = cos(2 pi 3 t) + cos(2 pi 5 t) has periods 1/3 and 1/5. Equivalently, the frequencies 3 and 5 Hz are both multiples of 1 Hz, so f0 = gcd(3, 5) = 1 Hz and T0 = 1 s. By contrast cos(t) + cos(sqrt(2) t) is not periodic: the frequency ratio is irrational, so the two never realign.

Python Fundamental period of a sum of tones

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Discrete-time periodicity

A discrete signal is periodic if x[n + N] = x[n] for some positive integer N. For x[n] = cos(Omega n) this happens only when Omega / (2 pi) = k / N is a rational number. Then the fundamental period is N = N_denominator of that fraction in lowest terms. Example: cos(3 pi n / 4) has Omega / 2 pi = 3/8 and period N = 8. But cos(n) (Omega = 1) is not periodic, even though a continuous cos(t) would be. This is the first hint that discrete time has its own rules.

Python Is a discrete sinusoid periodic?

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Periodic signals are even/odd friendly

Many periodic signals used in the Fourier chapters are even or odd: a square wave centred on the origin is even, a sawtooth through the origin is odd. When you see symmetry, use it.

flowchart TB
    S["x(t)"] --> E["even part<br/>(x(t) + x(-t))/2"]
    S --> O["odd part<br/>(x(t) - x(-t))/2"]
    E --> SUM["x = even + odd"]
    O --> SUM

Every signal is the sum of a mirror-symmetric piece and a point-symmetric piece.

Check your understanding

Quick check ยท 5 questions

of 5 answered You scored / 5 ยท perfect!

  1. 1. Which signal is odd?

    (-t)^3 = -t^3, so t^3 satisfies x(-t) = -x(t). The others are even.
  2. 2. What is the even part of x(t)?

    Averaging a signal with its mirror image keeps only the symmetric component.
  3. 3. What is the fundamental period of cos(2 pi 4 t) + cos(2 pi 6 t) with t in seconds?

    The common frequency is gcd(4, 6) = 2 Hz, so the period is 1/2 s.
  4. 4. cos(n) as a discrete-time signal is:

    Omega / 2 pi = 1 / 2 pi is irrational, so no integer N makes the signal repeat.
  5. 5. What is the integral of an odd signal over [-a, a]?

    The negative area on the left cancels the positive area on the right.

Summary

  • Even: x(-t) = x(t); odd: x(-t) = -x(t). Every signal splits into even plus odd parts.
  • Periodic signals repeat after T0; a sum of periodic signals is periodic only if the period ratio is rational.
  • Common frequency (gcd) gives the fundamental frequency of a sum of harmonics.
  • Discrete sinusoids need Omega / 2 pi rational to be periodic; the period is its denominator.

Next: Energy and Power Signals