Skip to content
Tutorials Center
My learning

Topics

Lesson 5 of 36 ยท Signals and Classification

Basic Signals: Step, Impulse, Ramp, Exponential

Meet the building-block signals of the field: unit step, unit impulse, ramp, rectangular pulse, exponentials and sinusoids, in continuous and discrete time.

Complicated signals are built from a small vocabulary of simple ones. Learn these well and you can express almost anything: a switch turning on is a step, a hammer tap is an impulse, a decaying echo is a real exponential, a pure tone is a sinusoid. Most of the theory in the later chapters is stated in terms of them.

Unit step

The unit step switches on at time zero.

  • Discrete: u[n] = 1 for n >= 0, else 0.
  • Continuous: u(t) = 1 for t > 0, else 0 (the value at exactly 0 is a convention, often 1/2 or left undefined).

Multiplying any signal by u(t) makes it causal: it "switches on" at 0.

Unit impulse

The discrete unit impulse (Kronecker delta) is delta[n] = 1 when n = 0, otherwise 0. It is a single 1 in a sea of zeros.

The continuous unit impulse delta(t) (Dirac delta) is not an ordinary function. It is a limit of ever-narrower, ever-taller pulses with area 1. Its defining behavior is the sifting property:

integral of x(t) delta(t - t0) dt = x(t0)

Inside an integral the impulse picks out the value of x at t0. The discrete version is a plain sum: sum over n of x[n] delta[n - n0] = x[n0].

The step and impulse are related. In discrete time, delta[n] = u[n] - u[n-1] and u[n] = sum of delta[k] for k <= n (a running sum). In continuous time, delta(t) = du/dt.

Python Step, impulse and their relation

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Ramp and pulse

The unit ramp is r[n] = n u[n] (or r(t) = t u(t)): zero until 0, then rising at slope 1. It is the integral of the step. A rectangular pulse is the difference of two steps: rect = u(t + 1/2) - u(t - 1/2) is 1 for |t| < 1/2. Pulses built from steps are the easiest way to write "on for a while, then off".

Python A pulse made from two steps

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Real exponential

x(t) = A e^(a t) with real a. If a < 0 it decays (a discharging capacitor), if a > 0 it grows (unchecked population). In discrete time the form is x[n] = A r^n: with |r| < 1 it decays, with |r| > 1 it grows, and with a negative r it flips sign each step. The time constant of a decaying exponential is tau = 1/|a|: after one tau the signal has fallen to about 37 percent.

Sinusoid

x(t) = A cos(2 pi f t + phi) has amplitude A, frequency f (Hz), angular frequency w = 2 pi f (rad/s) and phase phi. A discrete sinusoid is x[n] = A cos(Omega n + phi); the discrete frequency Omega is in radians per sample. A surprise awaits in discrete time: x[n] is only periodic if Omega / (2 pi) is a rational number, and frequencies Omega and Omega + 2 pi give identical signals. We return to that in the sampling chapter.

Complex exponential

x(t) = e^(j w t) combines the sinusoid pair (see Complex Numbers and Phasors). With a decay factor, e^((sigma + j w) t) is a damped sinusoid when sigma < 0, the characteristic response of springs and RLC circuits.

Python Decaying and damped signals

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

A signal zoo in one picture

Building-block signals

Unit step Switches on at 0
Unit impulse A single spike
Ramp Rises at slope 1
Sinusoid A pure tone

Everything else is built from these.

1 / 2

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What is the sum over n of x[n] delta[n - 3]?

    The sifting property picks out the single value of x where the impulse equals 1, which is n = 3.
  2. 2. How is the discrete impulse written using steps?

    The two steps agree everywhere except n = 0, so their difference is a single 1 at n = 0.
  3. 3. The time constant of e^(-t/0.2) is:

    For e^(-t/tau) the time constant is tau, here 0.2 s.
  4. 4. Which discrete exponential alternates in sign while decaying?

    A negative base flips the sign every step, and |r| < 1 makes it shrink.

Summary

  • The unit step switches on; the unit impulse is a single spike with the sifting property.
  • Discrete: delta[n] = u[n] - u[n-1]; continuous: delta(t) = du/dt.
  • Ramps, pulses and one-sided signals are built by multiplying by or subtracting steps.
  • Real exponentials decay or grow with time constant 1/|a|; sinusoids carry amplitude, frequency and phase.
  • Complex exponentials unify sinusoids and damped waves.

Next: Operations on Signals