Skip to content
Tutorials Center
My learning

Topics

Lesson 5 of 39 ยท Qubits and Superposition

The Qubit and Its State Vector

Learn how a qubit is described by two complex amplitudes, the computational and other bases, normalization, and how to build and inspect qubit states in Python.

A classical bit is a switch: 0 or 1. A qubit is described by two complex numbers, called amplitudes, that say how much "0-ness" and how much "1-ness" the qubit has. This lesson turns that sentence into code: you will build qubit states, check that they are valid, and learn the standard states every quantum programmer recognizes on sight.

The state vector of one qubit

The state of a qubit is

|psi> = alpha |0> + beta |1>

where alpha and beta are complex numbers with |alpha|^2 + |beta|^2 = 1. As a vector this is [alpha, beta]. The states |0> and |1> are the computational basis: [1, 0] and [0, 1]. Any other state with both amplitudes non-zero is a superposition of them.

The amplitudes are not probabilities. They carry both a size and a phase. The squared sizes, |alpha|^2 and |beta|^2, will be the probabilities of reading 0 and 1 when you measure (see Measurement and the Born Rule).

Python Build qubit states and check them

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Famous states

A few states appear in almost every circuit. Learn their names and amplitudes:

State Vector Description
|0> [1, 0] Definitely 0
|1> [0, 1] Definitely 1
|+> [1, 1] / sqrt(2) Equal mix, same sign
|-> [1, -1] / sqrt(2) Equal mix, opposite sign
|i> [1, i] / sqrt(2) Equal mix, quarter-turn phase
|-i> [1, -i] / sqrt(2) Equal mix, opposite quarter turn

The pairs {|0>, |1>}, {|+>, |->} and {|i>, |-i>} are three different bases. Within each pair, the two states are orthogonal. Each basis answers a different "question" about the qubit: the first asks "is it 0 or 1?", the second asks "is the phase positive or negative?", the third asks about the quarter-turn phase. They are called the Z, X and Y bases after the Pauli matrices that have these states as eigenvectors.

Python The six standard states

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Notice that |+>, |->, |i> and |-i> all give a fifty-fifty result when measured in the 0/1 basis, even though they are four different states. The differences live entirely in phases, which the 0/1 measurement cannot see directly. This is why interference experiments need extra gates before measuring.

Basis changes

A basis is a set of orthogonal, normalized vectors that can build any state. Writing a state in a different basis is like changing coordinates. For example,

|0> = (|+> + |->) / sqrt(2).

The state |0> is certain in the Z basis and a fifty-fifty mix in the X basis. To find the coefficient on a basis vector b, take the inner product <b|psi>. Quantum programs use this constantly: "rotate into a convenient basis, then measure".

Python Expanding a state in another basis

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Global phase again

The states [alpha, beta] and e^(i*t) * [alpha, beta] are physically identical. If you want a unique representation, you may choose the first amplitude to be real and non-negative. A general qubit then needs just two real numbers: one for how the weight splits between 0 and 1, and one for the relative phase. The next lesson, The Bloch Sphere, turns those two numbers into angles on a sphere, a picture that makes qubit behavior much easier to reason about.

Qubit versus bit versus probabilistic bit

A probabilistic bit (a coin) is also described by two numbers, but those are non-negative probabilities that add to 1. A qubit differs in two ways:

  • Its numbers are complex amplitudes and can be negative, so they can cancel (interference).
  • Its description has a phase, so many different qubit states give the same 0/1 probabilities.

A coin is flipped into a state [0.5, 0.5] and stays randomly 50/50 forever. A qubit in |+> is not "random": applying a gate can steer it deterministically to 0, which no coin allows.

Do not read "qubit is in a superposition" as "we do not know which value it has". A qubit in |+> has no hidden 0 or 1. Its state is perfectly known: it is |+>.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Which pair of amplitudes is a valid qubit state?

    0.6^2 + 0.8^2 = 1. The others have squared sizes that sum to 2, 0.5 and 4.
  2. 2. What is the measurement probability of 0 for the state |-> = [1, -1]/sqrt(2) in the 0/1 basis?

    |1/sqrt(2)|^2 = 1/2. The minus sign is a phase and does not change the probability.
  3. 3. Which pair is orthogonal?

    <+|-> = (1 - 1)/2 = 0. The other pairs have non-zero overlap.
  4. 4. Why do |+> and |-> behave differently if they have the same measurement probabilities in the 0/1 basis?

    Relative phase is invisible to a 0/1 measurement but affects interference after other gates.

Summary

  • A qubit state is alpha|0> + beta|1> with |alpha|^2 + |beta|^2 = 1.
  • |+>, |->, |i>, |-i> are equal mixes that differ in phase.
  • A basis is a set of orthogonal states; the Z, X and Y bases are the standard three.
  • Coefficients in a new basis are inner products.
  • Global phase is irrelevant; relative phase is not.

Next: The Bloch Sphere