Skip to content
Tutorials Center
My learning

Topics

Lesson 20 of 37 · Trigonometric Functions Review

The Unit Circle and Radians

Learn radians, the unit circle and exact values of sine and cosine, with runnable converters and a checker for the special angles.

Trigonometry began with right triangles, but in pre-calculus it becomes the study of circles. The unit circle lets you define sine and cosine for any angle, positive or negative, larger than a full turn or not. Radians are the angle unit that makes the formulas of calculus clean.

This lesson reviews both ideas and gives you tools to check your work: a converter, and a program that rebuilds the table of exact values from scratch.

Radians: measuring angles by arc length

A radian is the angle at the center of a circle that cuts off an arc whose length equals the radius. Since the circumference is 2πr, a full turn contains 2π radians.

Text
2π rad = 360°        π rad = 180°
1 rad  = 180°/π ≈ 57.2958°

To convert, multiply by the right ratio:

  • degrees to radians: multiply by π/180
  • radians to degrees: multiply by 180/π

Example: 150° × π/180 = 5π/6. And 7π/4 × 180/π = 315°.

Radians also give a simple arc-length rule. For a circle of radius r and a central angle θ in radians:

Text
arc length s = r·θ
sector area A = ½·r²·θ

These work only when θ is in radians. A 2 rad angle on a circle of radius 5 cm cuts an arc of 5 × 2 = 10 cm.

Python Angle converter and arc length

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The unit circle

The unit circle has radius 1 and is centered at the origin. Start at the point (1, 0) and rotate counterclockwise by θ (clockwise if θ is negative). The point you land on has coordinates

Text
(cos θ, sin θ)

That is the definition for every angle. Because the point lies on the circle x² + y² = 1, you immediately get the Pythagorean identity:

Text
cos²θ + sin²θ = 1

Tangent is the ratio tan θ = sin θ / cos θ, undefined where cos θ = 0.

Special angles

Two triangles give every exact value you need:

  • the 45-45-90 triangle with legs 1 and hypotenuse √2,
  • the 30-60-90 triangle with sides 1, √3, 2.

Scale each to hypotenuse 1 and read off coordinates.

Angle Radians cos θ sin θ
0° 0 1 0
30° π/6 √3/2 1/2
45° π/4 √2/2 √2/2
60° π/3 1/2 √3/2
90° π/2 0 1

A memory trick: the sine values for 0°, 30°, 45°, 60°, 90° are √0/2, √1/2, √2/2, √3/2, √4/2. Cosine runs the same list backwards.

You do not need to memorize the whole circle. Learn the first quadrant, then use symmetry (next section) for the rest.

Reference angles and quadrants

Any angle has a reference angle: the acute angle between its terminal side and the x-axis. The values of sine and cosine match those of the reference angle, up to sign.

Quadrant cos sin tan
I (0 to π/2) + + +
II (π/2 to π) − + −
III (π to 3π/2) − − +
IV (3π/2 to 2π) + − −

Example: find sin(5π/6). The angle is in quadrant II; its reference angle is π − 5π/6 = π/6. Sine is positive there, so sin(5π/6) = 1/2.

Example: find cos(240°). The angle is in quadrant III with reference angle 240° − 180° = 60°. Cosine is negative there, so cos 240° = −1/2.

Angles that differ by a full turn share the same point, so sin(θ + 2π) = sin θ and cos(θ + 2π) = cos θ. This is what periodic means.

Python Rebuild the special-angle table

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Coterminal angles and negative angles

Two angles are coterminal if they end at the same point on the circle. Add or subtract multiples of 2π (or 360°). So −π/3, 5π/3 and 11π/3 are all coterminal, and cos(−π/3) = cos(5π/3) = 1/2.

Negative angles run clockwise, and symmetry gives:

Text
cos(−θ) =  cos θ    (cosine is even)
sin(−θ) = −sin θ    (sine is odd)

Common mistakes

  • Using a calculator in degree mode for a radian question (or the reverse). Check the mode first.
  • Forgetting the sign in quadrants II to IV. Always find the reference angle, then apply the sign table.
  • Writing sin²θ as sin θ². The first means (sin θ)².

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. How many radians are in 135 degrees?

    135 × π/180 = 3π/4.
  2. 2. What is the arc length on a circle of radius 6 cm for a central angle of 1.5 rad?

    s = rθ = 6 × 1.5 = 9 cm.
  3. 3. What is sin(7π/6)?

    7π/6 is in quadrant III with reference angle π/6. Sine is negative there, so the value is -1/2.
  4. 4. Which point on the unit circle corresponds to the angle π/2?

    cos(π/2) = 0 and sin(π/2) = 1, so the point is (0, 1).

Summary

  • One radian is the angle whose arc equals the radius; π rad = 180°.
  • Arc length s = rθ and sector area ½r²θ need radians.
  • On the unit circle the point at angle θ is (cos θ, sin θ), and cos²θ + sin²θ = 1.
  • Use reference angles plus the quadrant sign table to find any exact value.
  • Cosine is even, sine is odd, and both repeat every 2π.

Next: Graphs of Sine and Cosine