Skip to content
Tutorials Center
My learning

Topics

Lesson 29 of 37 · Parametric and Polar Equations

Eliminating the Parameter

Convert parametric equations to rectangular form by substitution and trig identities, handle restricted domains, and check results by computer.

A parametric description is great for motion, but sometimes you want a single equation relating x and y: the rectangular form. The process of getting there is called eliminating the parameter. It tells you what shape the curve has, and the original parameter interval tells you which part of that shape is actually drawn.

Method 1: solve and substitute

If one of the equations is easy to solve for t, do that and substitute into the other.

Example: x = 3t − 2, y = t² + 1.

From the first, t = (x + 2)/3. Then

Text
y = ((x + 2)/3)² + 1 = (x + 2)²/9 + 1

This is a parabola. If t can be any real number, x can be any real number, so the whole parabola is traced.

Example with a restriction: x = √t, y = t + 1, t ≥ 0.

Square the first: t = x², so y = x² + 1. But x = √t ≥ 0, so only the right half of the parabola is traced: y = x² + 1 for x ≥ 0.

Always read the range of x and y implied by the parameter interval. The rectangular equation alone may describe more than the parametric curve does.

Method 2: use a trig identity

When the equations use sine and cosine of the same argument, use cos²t + sin²t = 1.

Example: x = 4 cos t, y = 3 sin t. Then cos t = x/4, sin t = y/3:

Text
(x/4)² + (y/3)² = 1     →     x²/16 + y²/9 = 1

An ellipse. For 0 ≤ t ≤ 2π the full ellipse is traced once.

Example: x = 1 + 2 sin t, y = −3 + 2 cos t. Isolate sin t = (x − 1)/2 and cos t = (y + 3)/2:

Text
(x − 1)² + (y + 3)² = 4

A circle with center (1, −3) and radius 2.

Another variation uses a double angle. x = cos 2t, y = sin t: since cos 2t = 1 − 2 sin²t, we get x = 1 − 2y² with y between −1 and 1 (the whole parabola arc between those heights).

Method 3: use an exponential or other identity

If x = eᵗ and y = e⁻ᵗ, then xy = 1, so y = 1/x, but x = eᵗ > 0, so only the branch with x > 0 appears.

Example: x = t², y = t³. Then y² = t⁶ = x³, a cusp curve y² = x³. Both branches appear because t can be negative.

Python Verify an elimination numerically

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Going the other way: parametrizing a curve

You can always parametrize y = f(x) by setting x = t, y = f(t). To parametrize a line from (x₁, y₁) to (x₂, y₂):

Text
x = x₁ + (x₂ − x₁) t
y = y₁ + (y₂ − y₁) t,     0 ≤ t ≤ 1

At t = 0 you are at the start point and at t = 1 at the end. The midpoint is at t = ½.

For a circle or ellipse, use sine and cosine with the radius or semi-axes.

Example

Parametrize the segment from A(1, 2) to B(5, −2): x = 1 + 4t, y = 2 − 4t. Eliminating t gives y = 2 − (x − 1) = 3 − x, with 1 ≤ x ≤ 5.

Slope of a parametric curve

You can find slopes without eliminating anything. Slope is change in y per change in x, so for small steps in t:

Text
dy/dx = (dy/dt) / (dx/dt)

You will see this properly in calculus. For now, you can estimate it numerically from two nearby points.

Python Line segment and slope estimate

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Eliminate t from x = t - 1, y = t² + 2t.

    t = x + 1, so y = (x + 1)² + 2(x + 1) = x² + 4x + 3.
  2. 2. What is the rectangular form of x = 3 cos t, y = 3 sin t?

    x² + y² = 9(cos²t + sin²t) = 9.
  3. 3. For x = √t, y = t + 1 with t ≥ 0, which part of y = x² + 1 is traced?

    Because x = √t is never negative.
  4. 4. Which parametrization traces the segment from (0, 0) to (6, 3) for 0 ≤ t ≤ 1?

    At t = 0 it is at (0, 0) and at t = 1 at (6, 3).

Summary

  • Eliminate the parameter by solving for t and substituting, or by using cos²t + sin²t = 1.
  • The parameter interval can restrict which part of the rectangular curve is drawn.
  • The line from P to Q is P + t(Q − P), 0 ≤ t ≤ 1.
  • dy/dx = (dy/dt)/(dx/dt) gives slopes straight from a parametrization.

Next: Polar Coordinates