Skip to content
Tutorials Center
My learning

Topics

Lesson 28 of 37 ยท Telescopes and Space Exploration

How Telescopes Work

Learn how refractors and reflectors collect light, why aperture matters more than magnification, and calculate light gathering and resolution.

A telescope does not mainly make things bigger. Its first job is to collect more light than your eye can, so faint objects become visible. Its second job is to show finer detail. Only third does it magnify. In this lesson you will see how the main designs work and learn the three numbers that matter: aperture, resolution and magnification.

Two basic designs

Refracting telescopes use a lens at the front (the objective) to bend light to a focus. A second lens, the eyepiece, magnifies the image. Galileo used a refractor in 1609-1610 to see Jupiter's moons and the phases of Venus.

Reflecting telescopes use a curved mirror to gather and focus light. Isaac Newton built the first practical one in 1668. Nearly all large research telescopes today are reflectors, because:

  • A mirror reflects light of every color to the same focus, while a simple lens bends colors differently (chromatic aberration).
  • A mirror can be supported from behind, so it can be very large. A lens can only be held at its edge and sags under its own weight.
  • Only one surface needs to be made precisely.
flowchart LR
A["Light from a distant star"] --> B["Objective lens or primary mirror"]
B --> C["Focus"]
C --> D["Eyepiece or camera"]

The basic path of light through a telescope.

The three key numbers

Aperture: the light bucket

The aperture D is the diameter of the main lens or mirror. Light collected is proportional to the area, so it grows as Dยฒ. A telescope with twice the aperture collects four times as much light. The human eye's pupil opens to about 7 mm in the dark.

Python Light-gathering power

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Resolving power

Because light behaves as a wave, a telescope cannot show infinitely fine detail. The smallest angle it can separate is limited by diffraction:

ฮธ โ‰ˆ 1.22 ฮป / D (in radians)

where ฮป is the wavelength and D the aperture, both in meters. One radian is about 206,265 arcseconds. A bigger aperture or a shorter wavelength gives finer detail. A practical rule of thumb in the visible band is the Dawes limit, about 116 / D arcseconds with D in millimeters.

From the ground, the atmosphere blurs the image (stars "twinkle"), so large telescopes are often limited to about 0.5 to 1 arcsecond unless they use adaptive optics, which flexes a mirror many times a second to cancel the blur.

Python Diffraction limit calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The Moon is about 1,900 arcseconds wide, and Jupiter about 30 to 50 arcseconds. That puts the numbers in perspective.

Magnification

Magnification is the ratio of the focal lengths of the objective and the eyepiece:

M = f_objective / f_eyepiece

A 1,000 mm telescope with a 10 mm eyepiece gives 100x. But magnification is limited: if you magnify beyond what the aperture and atmosphere allow, the image just gets bigger and blurrier. A common guideline is a maximum useful magnification of about 2 times the aperture in millimeters. A 100 mm telescope tops out near 200x.

Be careful of telescopes advertised as "600x power" with a tiny aperture. A small lens collects little light and shows little detail, no matter how strong the magnification. For a beginner, a larger aperture and a steady mount are worth far more than a high-power label.

Mounts and big telescopes

A telescope needs a steady mount. Because Earth rotates, objects drift across the view; an equatorial mount has one axis aligned with Earth's axis, so one slow motion tracks the sky.

Large observatories use segmented mirrors: many hexagonal pieces that act as a single mirror. The James Webb Space Telescope has 18 gold-coated beryllium segments making a 6.5 m mirror. The Extremely Large Telescope, under construction in Chile, is designed for a 39 m mirror.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. If you double a telescope's aperture, how much more light does it collect?

    Light gathering depends on the area of the mirror or lens, which goes as the diameter squared.
  2. 2. Why do most large telescopes use mirrors instead of lenses?

    Mirrors focus all colors alike and can be made very large with back support.
  3. 3. A telescope has a 900 mm focal length and a 15 mm eyepiece. What is its magnification?

    M = 900 / 15 = 60.
  4. 4. What limits the finest detail a perfect telescope can show?

    Because light is a wave, resolution is limited to about 1.22 ฮป / D.

Summary

  • Telescopes mainly collect light (aperture) and resolve detail; magnification is secondary.
  • Light gathering scales as Dยฒ, and diffraction-limited resolution as 1.22 ฮป / D.
  • Reflectors dominate research astronomy because mirrors can be large and avoid color errors.
  • Magnification is f_objective / f_eyepiece, and is useful only up to about twice the aperture in mm.

Next: Light Across the Spectrum