Skip to content
Tutorials Center
My learning

Topics

Lesson 11 of 37 ยท Filters and Display

Columns, Coloring Rules and Profiles

Customize Wireshark: add columns from any field, choose time display formats, write coloring rules, and keep layouts, filters and colors in configuration profiles.

Filters decide which packets you see; customization decides how you see them. A few minutes spent adding the right columns and colors turns the packet list into a dashboard where problems stand out without any clicking. Profiles let you keep different setups for different jobs and switch between them instantly.

Custom columns

The default columns are generic. Analysts usually add more:

  • Right-click a field in the Packet Details pane and choose Apply as Column. The column appears immediately with that field's value for every packet.
  • Or use Edit > Preferences > Appearance > Columns and press +, choose type Custom and type a field such as tcp.stream or http.host.
  • Right-click a column header to hide, show, resize, align or remove columns, and to Resize to contents.

Columns that pay off quickly:

Column field Why
tcp.stream Group packets into connections; use tcp.stream eq 4 to isolate one
tcp.srcport, tcp.dstport Ports next to addresses
frame.time_delta_displayed Time since the previous displayed packet (spots gaps)
tcp.analysis.ack_rtt Round-trip time of each ACK
http.host and http.request.uri What a web client asked for
dns.qry.name Which names were looked up
ip.ttl Hop count hints
tls.handshake.extensions_server_name Which site a TLS connection is for (the SNI)

A custom column may combine alternatives with ||, for example http.host || dns.qry.name shows whichever exists. You can also type a column title and decide whether to show it as a resolved value (names instead of numbers).

Time display formats

The Time column is where most misunderstandings happen. Choose View > Time Display Format:

Format Shows Use it for
Seconds Since Beginning of Capture (default) 0.000000, 0.012340 ... Timing within one capture
Seconds Since Previous Captured Packet gap since the packet before Finding stalls
Seconds Since Previous Displayed Packet gap in the filtered view Gaps inside one conversation
Date and Time of Day 2026-01-05 10:00:00.042 Matching log files
UTC Date and Time of Day same in UTC Comparing across time zones

Use Edit > Set/Unset Time Reference (Ctrl+T) on one packet to measure everything relative to it (marked *REF*), which is perfect for "how long after the request did the reply come?". The "previous displayed" gap is also available as the frame.time_delta_displayed column.

The stand-in computes these formats from timestamps, so you can see how the same data produces different columns. The numbers are invented.

Python The same timestamps in different time formats (stand-in)

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Coloring rules

Wireshark colors packet rows with coloring rules: each rule is a name, a display filter and a foreground and background color. Open View > Coloring Rules. The rules are checked from top to bottom and the first match wins, so order matters. The defaults (the exact set and colors differ by version) color, for example, TCP problems and resets in alarming colors (black background with red text for "Bad TCP"), HTTP, TCP, UDP, ICMP and ARP in distinct pastels, and routing protocol events in their own shades.

To add your own, press +, give it a name, a filter and colors:

TEXT
Slow DNS        dns.time > 0.5                 orange
Big frames      frame.len > 1400               light purple
Internal only   ip.src == 10.0.0.0/8 and ip.dst == 10.0.0.0/8
HTTP errors     http.response.code >= 400      red text

Temporary colors are also available: right-click a packet and choose Colorize Conversation, or use View > Colorize Conversation to color one flow by hand (clear with Reset Colorization). To disable coloring for performance or taste, toggle View > Colorize Packet List.

The stand-in models the first-match-wins logic with invented rules and packets, so you can see what happens when you reorder the list.

Python First matching coloring rule wins (stand-in)

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Configuration profiles

A profile is a named set of preferences, columns, coloring rules, filter buttons, recent filters, layout and decode-as settings. Switch profiles from the status bar (bottom right) or Edit > Configuration Profiles. Typical profiles:

  • Default: general use.
  • Troubleshooting: TCP analysis columns, tcp.stream, delta time, and red/orange rules for retransmissions and resets.
  • Web: http.host, http.request.uri, response codes, TLS server name.
  • Wireless: radiotap signal strength, channel, frame type columns.
  • VoIP: SIP and RTP columns.
  • Training/Demo: large fonts, minimal colors.

Create one with Edit > Configuration Profiles > New, optionally copying an existing profile. Profiles live in your personal configuration folder (Help > About Wireshark > Folders shows the exact path), as a directory of plain text files (preferences, colorfilters, dfilter_buttons...), so you can back them up, share them with teammates, or version-control them. Importing a profile from someone you do not trust is a risk: preferences can point to scripts (for example Lua plugins), so read before you import.

Layout and other display tweaks

  • Edit > Preferences > Appearance > Layout lets you choose pane positions, and hide a pane you do not need.
  • View > Zoom In/Out (Ctrl + / Ctrl -) changes the font size, great for screen sharing.
  • View > Resize All Columns (Ctrl+Shift+R) fits everything after you change the columns.
  • View > Name Resolution toggles MAC, network and transport name resolution; remember it can send DNS queries.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. How do you add a column showing the value of a field from the Packet Details pane?

    Apply as Column adds the field as a custom column right away.
  2. 2. Two coloring rules both match a packet. Which one colors it?

    Rules are evaluated top to bottom, and the first match wins, so order matters.
  3. 3. You want the gap between a request and its reply. Which tool is best?

    A time reference (Ctrl+T) or a delta-time column lets Wireshark compute gaps for you.
  4. 4. What does a configuration profile store?

    A profile bundles your Wireshark settings so you can switch setups quickly.

Summary

  • Add columns from any field with Apply as Column; useful ones are tcp.stream, delta time, http.host and dns.qry.name.
  • Choose the time display format that matches the question: since start, since previous displayed, or time of day.
  • Coloring rules combine a display filter with colors, and the first match wins.
  • Profiles keep setups for different tasks, and are plain files you can back up and share (carefully).
  • Spend time on your Troubleshooting profile; it pays back on every capture.

Next: Find, Follow Streams and Export