Skip to content
Tutorials Center
My learning

Topics

Lesson 28 of 36 ยท Exam Technique

Time Allocation in the Exam

Learn to split exam time by marks, spend reading time wisely, handle stuck questions and leave time to check, with a runnable timing calculator.

Running out of time is one of the most common exam problems, and it is usually predictable. Students spend too long on questions they like or find hard, and then rush through the rest. Marks are the same size everywhere on the paper, so time should be shared out by marks, not by mood.

This lesson gives you a simple method for dividing time, a plan for the first minutes of the exam and what to do when you get stuck.

The minutes-per-mark rule

Divide the total time by the total marks. That gives the minutes per mark.

Text
minutes per mark = total minutes รท total marks

Example: a paper lasts 90 minutes and is worth 100 marks. Minutes per mark = 90 รท 100 = 0.9. A 5-mark question deserves about 4.5 minutes.

Keep some time free at the end for checking. If you reserve 10 minutes for review, use 80 minutes for the answering part: 80 รท 100 = 0.8 minutes per mark.

JS Exam timing calculator

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Change the numbers to match your own paper. The marks and time limits are printed on the front of the real exam, so check them quickly when you start.

Different paper styles

  • Many short questions. Move quickly, and mark questions you skip so that you can return.
  • A few long essays. Divide time equally if marks are equal, and stop each essay on time even if you could say more.
  • Mixed papers. Allocate by section, and do not let section A eat the time for section B.
  • Choice of questions. Spend the first minutes choosing wisely, then commit.

The first five minutes

Some exams include official reading time. If yours does not, you can still use the first few minutes well.

  1. Read the instructions: how many questions, which are compulsory, what choice you have.
  2. Scan the whole paper to see the marks.
  3. Decide your order. Many students start with questions they are confident about, to bank marks and build confidence, as long as they stay within the time plan.
  4. Write the planned finish time for each section beside it.

When you are stuck

Getting stuck is normal. The rule: set a time limit, then move on.

  • If you have used about double the planned time on a question, stop.
  • Write down anything you have, because partial marks are common.
  • Mark the question clearly so you can return.
  • Leave a gap if you will come back, or finish the question with a quick answer.

When you return, a new look often shows a way in. Never leave a multiple-choice or short-answer question blank if there is no penalty for wrong answers (check the instructions).

Python Simulate time lost on one hard question

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The invented numbers show that spending too long on one question squeezes every later one. The cost is spread across all the remaining marks.

Use a checking pass

Use your reserved minutes to:

  • reread questions you answered quickly, and check that you answered what was asked,
  • check calculations (does the answer have the right unit, a sensible size and the right number of significant figures?),
  • fill gaps with partial answers,
  • read over written answers for missing words.

Wear a watch if allowed, or sit where you can see the clock. Check it at planned moments, not constantly. Looking too often can raise anxiety.

Practice makes timing natural

Timing is a skill you practice: use timed sections and full past papers before the exam. After each, note which questions took longer than planned and why.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. A 120-minute paper is worth 80 marks. About how many minutes per mark is that, with no review time?

    120 รท 80 = 1.5 minutes per mark.
  2. 2. You are stuck on a question that has taken twice its planned time. What should you do?

    Banking marks elsewhere is worth more than burning time on one question.
  3. 3. Why reserve minutes at the end of the paper?

    A checking pass finds slips and lets you add missing points.
  4. 4. Time should be divided according to:

    Marks measure how much each question can add to your score.

Summary

  • Minutes per mark = available minutes รท total marks.
  • Reserve time at the end to check.
  • Use the first minutes to scan the paper and plan your order.
  • When stuck, write what you can, mark it and move on.
  • Practice timing before the exam.

Next: Multiple-Choice Questions