Skip to content
Tutorials Center
My learning

Topics

Lesson 2 of 38 ยท Getting Started

Types of Robots

A tour of the main robot families (industrial arms, wheeled and legged robots, drones, humanoids, soft and swarm robots) and how to choose one for a task.

Robots come in many shapes because the job decides the body. A robot that welds car doors never moves from its spot, while a robot that explores a cave must travel. Sorting robots into families helps you choose the right design and know which mathematics applies. This lesson surveys the main families and includes a small program that scores designs against a task.

Robot families

Manipulators Fixed base, moving arm
Wheeled robots Fast and simple on flat floors
Legged robots Handle stairs and rubble
Aerial robots Drones that fly

Body shape follows the job

1 / 2

Manipulators (robot arms)

A manipulator is a chain of rigid links joined by motors and ending in a tool, called the end effector (gripper, welding torch, suction cup, screwdriver). The base is bolted down. Arms dominate factories because they are fast, strong and repeatable to a fraction of a millimeter.

Common layouts:

  • Articulated arm: six rotating joints, like a human arm with a wrist. The most versatile.
  • SCARA: two parallel rotating joints plus a vertical slide. Very fast for placing parts on a flat surface.
  • Cartesian (gantry): three linear axes at right angles. It is the layout of most 3D printers.
  • Delta (parallel): three arms joined at a light platform. Used for rapid picking of food and parts.

Their math is covered in Forward Kinematics and Inverse Kinematics.

Mobile robots

A mobile robot can change its place. The key choice is how it moves:

  • Wheeled: efficient and simple. A differential drive robot has two driven wheels and steers by speed difference (mobile kinematics). Car-like robots steer with the front wheels and cannot spin on the spot. Omnidirectional wheels let a robot slide sideways.
  • Tracked: belts like a tank give grip on loose ground.
  • Legged: two, four or six legs cross stairs, gaps and rubble but need complex control and more energy.

Aerial, underwater and space robots

Drones (multirotors, fixed-wing aircraft) move in three dimensions and add problems of balance, wind and battery life. Underwater vehicles (ROVs when cable-controlled, AUVs when autonomous) work without GPS and with poor communication. Space robots, such as planetary rovers, must be reliable with no chance of repair.

Humanoids, soft robots and swarms

Humanoid robots have a torso, arms and legs so they can use tools and spaces built for people, at the cost of enormous complexity (two-legged balance is hard). Soft robots use flexible materials and air pressure; they conform to objects and are safe near people, but are difficult to model and control. Swarms use many cheap robots that coordinate with simple local rules, giving resilience: losing one robot barely matters.

Python Which body fits the task?

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The numbers are opinions, not data, but the method (list requirements, weight them, compare) is how real design reviews start.

Autonomy levels

Robots also differ in how much they decide for themselves:

  1. Teleoperated: a person drives; the robot may add stabilization (bomb-disposal robots).
  2. Programmed: repeats a fixed path (welding arms).
  3. Supervised autonomy: plans and moves alone but asks for help in hard cases (warehouse robots).
  4. Fully autonomous: completes goals in unknown surroundings (some planetary rovers).

Most real products sit in the middle. Full autonomy in open-ended settings remains an active research problem.

Python Degrees of freedom by family

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The next lessons formalize this idea in Robot Components and Degrees of Freedom.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What is an end effector?

    The end effector is the device that interacts with the work: a gripper, torch, suction cup or similar.
  2. 2. Which layout is the typical choice for fast pick-and-place of light items on a flat surface?

    SCARA and delta robots are optimized for speed in a small flat workspace.
  3. 3. Why choose a legged robot over a wheeled one?

    Legs handle discontinuous terrain, but cost more energy, money and control effort.
  4. 4. What is a robot swarm's main advantage?

    Many simple, replaceable robots following local rules give redundancy.

Summary

  • The task determines the body: arms for fixed workspaces, wheels for floors, legs for rough ground, rotors for the air.
  • Mobile robots differ mainly in locomotion; arms differ in joint layout.
  • Humanoids, soft robots and swarms trade simplicity for special abilities.
  • Autonomy ranges from teleoperation to full independence; most products are in between.

Next: Robot Components