Skip to content
Tutorials Center
My learning

Topics

Lesson 31 of 38 ยท The Coordinate Plane and Graphs

Reading and Interpreting Graphs

Learn to read line graphs and distance-time graphs, tell the story behind a graph, spot increasing, decreasing and constant sections, and avoid misleading scales.

Graphs are everywhere: news reports, weather forecasts, phone battery meters, school grade charts. A graph is a picture of a relationship between two quantities, and reading one well is a core skill. You should be able to say what each axis measures, what the shape tells you, and where the numbers could mislead.

Start with the axes

Before anything else, read three things:

  1. The title: what is the graph about?
  2. The axis labels and units: what does each axis measure (and in which units)?
  3. The scale: what is each grid step worth, and does the axis start at zero?

A graph titled "Temperature over a day" with the horizontal axis "hour (0 to 24)" and the vertical axis "ยฐC" tells you that every point is a pair (hour, temperature).

The story of a graph

Many graphs tell a story as you move from left to right. The shape of each part gives you information:

Shape of a section What it means
Rising line the quantity is increasing
Falling line the quantity is decreasing
Flat (horizontal) line the quantity is constant
Steeper line a faster rate of change
Peak (highest point) maximum value
Valley (lowest point) minimum value

A distance-time story. The graph below describes a walk to school.

  • From 0 to 10 minutes the line rises steadily: walking away from home.
  • From 10 to 15 minutes it is flat: stopped, perhaps at a crossing or talking to a friend. Distance is not changing.
  • From 15 to 20 minutes it rises more steeply: walking or running faster.
  • From 20 to 35 minutes it is flat again: at school.

Slope on a distance-time graph is speed. A steeper line means a higher speed. A flat line means speed zero. A line going down means moving back toward the start.

Python A walk to school graph

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The printed speeds are 60, 0, 80 and 0 m/min, which match the pieces of the story. This is a made-up example used to practice the idea.

Reading values from a graph

To read a value, find a position on one axis, go straight across to the line, then straight down or up to the other axis. When the line lies between grid marks you estimate (this is called interpolation when the value is inside the data). Extending the line beyond the data to make a prediction is extrapolation, which is riskier because trends may not continue.

If a plant grows from 10 cm to 30 cm in 4 weeks, with a straight line between, the rate is 5 cm per week. At 2 weeks it is about 20 cm (interpolation). At 12 weeks the line would predict 70 cm, but real plants stop growing, so this prediction is unreliable.

flowchart LR
  A["Read title<br/>and axes"] --> B["Check units<br/>and scale"]
  B --> C["Describe each section:<br/>up, down, flat"]
  C --> D["Find key points:<br/>max, min, intercepts"]
  D --> E["Tell the story in words"]

A routine for reading any graph.

Describing sections with numbers

You can turn a graph into numbers using slope. The tool below takes data points, labels each segment as increasing, decreasing or constant, and reports the rate.

Python Describe each section of a graph

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The final segment goes up 60 percent in one hour: this is a charging period in the story.

Be careful: misleading graphs

A graph can be accurate and still misleading. Watch out for:

  • A vertical axis that does not start at zero. A bar chart whose axis starts at 95 makes a change from 96 to 98 look enormous.
  • Different scales on the two axes, making a gentle slope look steep.
  • Cherry-picked time ranges, showing only the part that supports a claim.
  • Missing labels or units, so numbers cannot be interpreted.

The next plot shows the same data twice with different vertical axes.

Python Same data, different axis

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The left chart shows modest growth. The right chart exaggerates it. Neither contains false numbers, but they leave different impressions.

Common mistakes

  • Reading a distance-time graph as a picture of the path. A flat part means stopped, not "going straight".
  • Ignoring units, such as reading minutes as hours.
  • Treating a steeper line as "higher" instead of "faster change".

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. On a distance-time graph, what does a horizontal section mean?

    Distance does not change during a flat section, so the object is not moving.
  2. 2. A line goes from (0, 20) to (5, 45). What is the rate of change?

    (45 - 20) / (5 - 0) = 25 / 5 = 5 units of y per unit of x.
  3. 3. Which is extrapolation?

    Extrapolation extends the trend beyond the data, which is less reliable than interpolation.
  4. 4. Why can a vertical axis that starts at 95 be misleading?

    The numbers are still correct, but small differences look huge compared with a zero-based axis.

Summary

  • Read the title, axis labels, units and scale first.
  • Rising, falling and flat sections mean increasing, decreasing and constant; steeper means faster change.
  • On a distance-time graph, slope is speed.
  • Interpolation estimates inside the data; extrapolation goes beyond it and is riskier.
  • Watch for truncated axes, uneven scales and missing labels.

Next: Translating Words into Math