Skip to content
Tutorials Center
My learning

Topics

Lesson 37 of 37 ยท Projects and Practice

Practice: Podman Troubleshooting Drills

Practice real-world Podman problems: short-name errors, privileged ports, name conflicts, full disks, unreachable services, restarts and SELinux denials, with a diagnostic routine and drills.

Knowing the commands is half the job; the other half is looking at a failing system and knowing where to start. This closing lesson collects the problems that appear again and again, shows the usual cause and fix for each, and gives you a diagnostic routine plus drills to test yourself.

Everything runs on real systems, so the commands are read-only. The stand-ins match error messages to explanations and quiz you on scenarios.

A routine that always works

  1. Read the message. Podman errors usually name the problem. Copy the first line, not the last.
  2. Check the basics. podman info (versions, rootless or rootful, storage, network backend), podman ps -a, podman logs NAME.
  3. Inspect. podman inspect NAME shows the real configuration: networks, mounts, command, exit code, health.
  4. Reproduce small. Run the failing image with podman run --rm -it IMAGE sh and try the steps by hand.
  5. Change one thing at a time, and go back to the error message after each change.

Common errors

Short-name resolution cannot prompt. The message contains short-name resolution enforced but cannot prompt without a TTY. A short name like nginx matched several registries and there is no terminal to ask you. Fix: use the full name (docker.io/library/nginx). See Registries and Authentication.

Cannot expose privileged port. For a rootless user, publishing 80 fails with a message mentioning rootlessport and privileged port. Fix: publish a high port, or lower net.ipv4.ip_unprivileged_port_start. See Publishing Ports and Name Resolution.

Name already in use. the container name "web" is already in use. An old container (maybe stopped) has the name. Fix: podman rm web, or start the existing one, or use --replace on podman run.

No space left on device. Storage is full: podman system df, then prune what you no longer need (Storage Maintenance and Cleanup). Also check inodes with df -i.

Cannot connect to Podman. On macOS and Windows the machine may not be running: podman machine list, podman machine start. On Linux with a remote connection, check podman system connection list and that the socket is active (Podman Machine and Remote Podman).

Permission denied on a mounted folder. Two usual suspects: SELinux (add :z or :Z to the volume, for example -v ./data:/data:Z) and file ownership in rootless mode (the container's user is mapped to a different host user; try --userns=keep-id or podman unshare chown).

Container exits immediately. podman ps -a shows Exited (1). Read podman logs. Typical causes: the command finished (a container lives only as long as its main process), a missing environment variable, a wrong CMD, or a crash on startup. Exit code 137 means it was killed, often by the memory limit.

Service unreachable. Work through Troubleshooting Podman Networking: app listening address, network, published port, host firewall.

Image will not pull. Check the name and tag, run podman login for private registries, and check clock/proxy/DNS settings. A proxy needs HTTP_PROXY/HTTPS_PROXY in the environment of the Podman process.

Service does not start under systemd. systemctl --user status NAME and journalctl --user -u NAME. For Quadlet, run the generator in dry-run mode and look for syntax errors (Quadlet: Containers as systemd Units); remember daemon-reload.

An error explainer

Python Match an error to a cause (stand-in)

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Drills

Try each scenario before reading the hint.

  1. A rootless container publishing -p 443:443 fails. What are three ways forward?
  2. web can reach db by IP but not by name. Both use the default network.
  3. After a reboot, your rootless service did not start although the unit is fine.
  4. podman auto-update replaced an image and the service now loops. What protects you, and what do you check?
  5. A build reinstalls all dependencies on every edit of one source file.
  6. Compose file works on your laptop but fails on a colleague's with a short-name error.
Python Scenario drill runner (stand-in)

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

A one-page command reference

Terminal
podman info                           # environment and configuration
podman ps -a                          # every container, including stopped
podman logs -f NAME                   # output
podman inspect NAME                   # full configuration and state
podman exec -it NAME sh               # shell inside
podman port NAME                      # published ports
podman network inspect NET            # network details
podman system df                      # disk usage
podman events --since 10m             # what just happened
systemctl --user status UNIT          # for systemd-managed containers
journalctl --user -u UNIT -n 100      # service logs

Where to go next

You now know how Podman works on its own and with systemd. Good next steps: read through the generated YAML and units of your own projects, try rebuilding an existing Docker Compose project as a Quadlet stack, and set up a small registry with signing for your team. The track overview is at Podman.

Check your understanding

Quick check ยท 5 questions

of 5 answered You scored / 5 ยท perfect!

  1. 1. A container shows Exited (1) right after starting. What is the best first step?

    The container's own output usually names the cause. Read it before changing anything.
  2. 2. What does the flag :Z add to a volume option on SELinux systems?

    :z (shared) and :Z (private) relabel the files so the container's SELinux context can access them.
  3. 3. A name like web is already in use. Which is NOT a fix?

    Pruning images does not free a container name; remove or replace the container.
  4. 4. What is a good habit when troubleshooting?

    One change at a time shows which action fixed or broke something.
  5. 5. Which command shows a container's real configuration, mounts and health?

    inspect prints the complete configuration and state as JSON.

Summary

  • Troubleshoot with a routine: read the message, check basics, inspect, reproduce small, change one thing at a time.
  • Most errors fall into a few families: short names, privileged ports, name conflicts, storage, connectivity, permissions, exits and systemd.
  • podman logs, podman inspect, podman info and journalctl answer most questions.
  • Keep a short reference of commands for each layer and practice on small throwaway containers.

Next: Podman