Skip to content
Tutorials Center
My learning

Topics

Lesson 28 of 38 ยท TikZ and Graphics

TikZ Nodes and Diagrams

Build flowcharts and graphs with TikZ nodes: shapes, text, anchors, the positioning library, edges, named nodes, matrices and trees.

Lines and circles are fine for geometry, but most diagrams are made of boxes with text connected by arrows: flowcharts, state machines, block diagrams, network sketches. TikZ handles these through nodes. A node is a shape with text that you can name, position, style and connect.

Your first nodes

LATEX
\begin{tikzpicture}
  \node at (0,0) {Hello};                        % text at a position
  \node[draw] at (3,0) {Boxed};                  % draw its border
  \node[draw, circle, fill=yellow!30] (a) at (6,0) {A};
  \node[draw, rectangle, rounded corners, minimum width=2cm, minimum height=1cm] (b) at (9,0) {B};
  \draw[->] (a) -- (b);
\end{tikzpicture}

Inside the braces you can put any LaTeX, including math: {$\int_0^1 x\,dx$}. Names in parentheses ((a)) let you refer to the node later; TikZ then draws to its border, not its centre, so arrows end neatly at the edge.

Useful node options:

  • Shape: rectangle, circle, ellipse, diamond, trapezium (load \usetikzlibrary{shapes.geometric} for diamond and others).
  • Size: minimum width, minimum height, minimum size, inner sep, text width=3cm with align=center for wrapped text.
  • Look: draw, fill, thick, rounded corners, drop shadow.

Anchors and the node's compass

Each node has anchors: north, south east, west, center, text, base and so on. Refer to them with a dot: (a.east), (b.north west). Place a node relative to an anchor: \node[anchor=west] at (2,0) {Text}; puts its west side at that point. Angles also work: (a.30).

The stand-in below computes where TikZ ends an arrow on a rectangle's border, which is why arrows never overlap the text.

JS Where does an arrow touch a box?

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Placing nodes: the positioning library

Typing coordinates for every node is slow. The positioning library lets you say where a node goes relative to another:

LATEX
\usetikzlibrary{positioning, arrows.meta, shapes.geometric}

\begin{tikzpicture}[
  node distance = 1.2cm and 1.8cm,
  box/.style = {draw, rounded corners, minimum width=2.4cm, minimum height=0.9cm, align=center},
  decision/.style = {box, diamond, aspect=2},
  >={Stealth[round]}
]
  \node[box]                          (start) {Start};
  \node[box, below=of start]          (read)  {Read input};
  \node[decision, below=of read]      (ok)    {Valid?};
  \node[box, right=of ok]             (err)   {Show error};
  \node[box, below=of ok]             (done)  {Process};

  \draw[->] (start) -- (read);
  \draw[->] (read)  -- (ok);
  \draw[->] (ok)    -- node[left]  {yes} (done);
  \draw[->] (ok)    -- node[above] {no}  (err);
  \draw[->] (err)   |- (read);
\end{tikzpicture}

below=of read places the new node under read at node distance; with two values the first is vertical, the second horizontal. right=3cm of x, above left=of y and below=1cm of z give more control. The |- connector goes vertically then horizontally, useful for loops back to an earlier step.

The box/.style line is a style: a reusable bundle of options. See loops and styles.

Edges and labels

You can draw edges as part of a node definition or after it:

LATEX
\node (a) {A};
\node[right=of a] (b) {B} edge[->] node[above] {label} (a);

\draw[->] (a) to[bend left=30] node[midway, above] {$\alpha$} (b);
\draw[->] (b) edge[loop above] (b);                 % self loop (needs loop style)
\draw (a) -- node[sloped, below] {name} (b);        % rotated along the line

Positions on a line use pos=0.3 (30% along) or near start, midway, near end. The quotes library offers a lighter syntax: \draw[->] (a) to ["label", bend left] (b);.

Graphs, trees and matrices

Trees with child:

LATEX
\node {root}
  child { node {left}
    child { node {a} }
    child { node {b} } }
  child { node {right} };

For large trees, use the forest package, which understands a bracket syntax: \begin{forest} [root [left [a][b]] [right]] \end{forest}.

Matrices of nodes align content in a grid:

LATEX
\usetikzlibrary{matrix}
\matrix[matrix of nodes, nodes={draw, minimum size=8mm}, column sep=2mm, row sep=2mm] {
  1 & 2 & 3 \\
  4 & 5 & 6 \\
};

Graph syntax (a library) writes a graph in a compact form:

LATEX
\usetikzlibrary{graphs, graphdrawing}
\tikz \graph [nodes={draw, circle}] { a -> b -> c, a -> c };

The graphdrawing library needs LuaLaTeX; with pdfLaTeX place nodes yourself.

Remember

  • Use positioning for most diagrams and node distance for consistent spacing.
  • Name nodes in short, meaningful keys such as (read).
  • Put the diagram inside a figure with a caption and a label so you can refer to it (labels and cross-references).
  • For overlays on images use overlay and remember picture; they need two compilation runs.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What does \node[draw] (a) at (0,0) {A}; create?

    draw makes the border visible, (a) names it and at sets the position.
  2. 2. Which library lets you write below=of start?

    The positioning library adds the of syntax for relative placement.
  3. 3. What does (a.east) refer to?

    Anchors such as east, north and south west are points on a node's border.
  4. 4. Which path operation goes horizontally and then vertically?

    -| goes horizontal first then vertical; |- goes vertical first.

Summary

  • Nodes are shapes with text; name them to connect with \draw or edge.
  • Anchors such as .east and .north west give exact attachment points.
  • The positioning library places nodes relative to each other with node distance.
  • Labels on edges use node[midway, above]; use |- and -| for right-angle routes.
  • Trees, matrices and graph syntax cover structured layouts.

Next: TikZ Loops, Styles and Libraries