Skip to content
Tutorials Center
My learning

Topics

Lesson 14 of 39 ยท Second-order Linear ODEs

Oscillators, Springs and Resonance

Model spring-mass systems with m y'' + c y' + k y = F(t): free vibrations, damping ratio, forced response, beats and resonance, with Python simulations and checks.

Everything in chapter 3 comes together in the spring-mass-damper: a mass m on a spring of stiffness k with a damper (friction) of coefficient c, pushed by an external force F(t). Newton's second law gives

m*y'' + c*y' + k*y = F(t),

where y is displacement from rest. The same equation describes an RLC circuit (L*q'' + R*q' + q/C = E(t)), a pendulum at small angles, a building in an earthquake and a mechanical watch. Learning it once teaches you all of them.

Free undamped motion

With c = 0 and F = 0: m*y'' + k*y = 0. The characteristic roots are ยฑi*w0 with natural frequency w0 = sqrt(k/m) (radians per second), so

y = C1*cos(w0*t) + C2*sin(w0*t) = A*cos(w0*t - phi).

The mass oscillates forever with period T = 2*pi/w0 and constant amplitude A. Note that the frequency depends only on m and k, not on the amplitude: stiffer springs or lighter masses oscillate faster.

Python Natural frequency and period

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Free damped motion

With c > 0, divide by m to write y'' + 2*zeta*w0*y' + w0**2*y = 0, where the damping ratio is zeta = c/(2*sqrt(m*k)). The discriminant analysis from complex and repeated roots becomes:

  • zeta < 1: under-damped, y = e**(-zeta*w0*t)*(C1*cos(wd*t) + C2*sin(wd*t)), with damped frequency wd = w0*sqrt(1 - zeta**2);
  • zeta = 1: critically damped;
  • zeta > 1: over-damped.

A useful measurement: the logarithmic decrement delta = ln(y(t)/y(t + T_d)) = 2*pi*zeta/sqrt(1 - zeta**2) lets you estimate damping from two successive peaks.

Python Measure damping from peaks

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Forced vibration

Now let F(t) = F0*cos(w*t). By the undetermined coefficients method (for c > 0, no overlap with the decaying y_h), the long-term response is a sinusoid at the driving frequency:

y_ss = X*cos(w*t - delta), with amplitude X = F0 / sqrt((k - m*w**2)**2 + (c*w)**2).

The homogeneous part decays (the transient); the steady state remains. The amplitude X depends on frequency, and when c is small it peaks sharply near w โ‰ˆ w0. That peak is resonance: a small periodic push at the right frequency builds up a large oscillation (a child on a swing).

Python Amplitude versus driving frequency

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Light damping gives a tall narrow peak near w = 5, heavy damping a low broad bump. The peak height scales as 1/c.

Undamped resonance and beats

With c = 0 and w = w0, the forcing overlaps the homogeneous solution and the resonance rule gives y_p = (F0/(2*m*w0))*t*sin(w0*t): an oscillation whose amplitude grows linearly forever (in the linear model; real structures break or the model stops applying). Famous failures such as marching soldiers on bridges are traced to this effect.

Slightly off resonance, w close to w0, the solution with zero initial conditions is y = (2*F0/(m*(w0**2 - w**2)))*sin(((w0 - w)/2)*t)*sin(((w0 + w)/2)*t): a fast oscillation with a slowly pulsing envelope called beats, which musicians hear when tuning two strings.

Python Resonance and beats

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Design consequences

  • Keep driving frequencies away from w0, or add damping.
  • Tuned mass dampers in tall buildings add a second oscillator that absorbs energy near the building's natural frequency.
  • Filters and radio tuners use resonance: an RLC circuit selects the station whose frequency matches 1/sqrt(L*C).

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. The natural frequency of an undamped spring-mass system is

    The characteristic equation m r**2 + k = 0 has roots ยฑ i sqrt(k/m).
  2. 2. A system with damping ratio zeta = 0.3 is

    zeta < 1 means complex roots, so the motion oscillates with decaying amplitude.
  3. 3. What happens at undamped resonance (c = 0, w = w0)?

    The particular solution is proportional to t sin(w0 t) in the linear model.
  4. 4. Doubling the damping constant c near resonance roughly

    At w = w0 the amplitude is F0/(c*w0), inversely proportional to c.

Summary

  • The spring-mass-damper m y'' + c y' + k y = F(t) models many physical systems.
  • Natural frequency w0 = sqrt(k/m); damping ratio zeta = c/(2 sqrt(m k)) decides under-, critical and over-damping.
  • Forced response = decaying transient + steady-state sinusoid at the driving frequency.
  • Amplitude peaks near w0 for light damping (resonance); with no damping it grows linearly.
  • Near-resonant forcing produces beats.

Next: The Laplace Transform