Skip to content
Tutorials Center
My learning

Topics

Lesson 11 of 36 · Analytic Functions

Limits and Continuity

Define limits and continuity in the complex plane with epsilon-delta disks, test limits along different paths, and see why direction matters in two dimensions.

Calculus rests on limits, and complex analysis inherits that foundation. The definitions look just like the real ones, with distances replaced by moduli. The difference is geometric: in the plane you can approach a point from infinitely many directions, so a limit must give the same answer along every path.

Definition of a limit

Let f be defined near z₀ (possibly not at z₀ itself). We write

Text
lim (z → z₀) f(z) = L

if for every ε > 0 there is a δ > 0 such that 0 < abs(z - z₀) < δ implies abs(f(z) - L) < ε.

In words: however small a disk you draw around L, you can find a small disk around z₀ (with z₀ itself removed) that f maps entirely into the first disk. The sets abs(z - z₀) < δ are open disks, so the definition is about disks, not intervals.

Limits obey the familiar rules: if f → L and g → M, then f + g → L + M, f g → L M, and f/g → L/M when M ≠ 0. Also, a limit exists exactly when the limits of the real part and the imaginary part exist separately: f = u + iv → L = a + ib if and only if u → a and v → b (as (x, y) → (x₀, y₀)).

Why direction matters

In one real variable you check two directions, left and right. In the plane there are infinitely many. If you find two paths along which f approaches different values, the limit does not exist.

Example: f(z) = z̄/z at z₀ = 0. Approach along the real axis, z = x: f = x/x = 1. Approach along the imaginary axis, z = iy: f = (-iy)/(iy) = -1. Two different values, so lim (z→0) z̄/z does not exist.

Example: f(z) = z²/abs(z) near 0 does have a limit: abs(f) = abs(z)² / abs(z) = abs(z) → 0, so the limit is 0. When you suspect a limit exists, bound abs(f(z) - L) by something that tends to 0; that proves the limit for all paths at once.

Python Approaching a point along different paths

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

For z̄/z the value is exp(-2iθ) along the ray at angle θ, so it depends only on direction and never settles down: the printout shows several different values (directions 0 and 180 degrees happen to agree). For g the modulus shrinks with the radius in every direction.

Passing the path test along a few rays does not prove a limit exists. Curves like y = x² can behave differently from every straight line. To prove existence, use an ε-δ argument or a bound.

Limits at infinity and infinite limits

We say lim (z → ∞) f(z) = L if f(z) is within ε of L whenever abs(z) is large enough. Equivalently, lim (w → 0) f(1/w) = L. For example lim (z → ∞) (2z + 1)/(z - 3i) = 2, since dividing top and bottom by z gives (2 + 1/z)/(1 - 3i/z) → 2.

We write lim (z → z₀) f(z) = ∞ if abs(f(z)) → ∞. For example lim (z → 0) 1/z = ∞. There is only one "infinity" in the complex setting, and it has no direction. Every direction of escape counts the same.

Continuity

A function f is continuous at z₀ if f(z₀) is defined and

Text
lim (z → z₀) f(z) = f(z₀)

It is continuous on a set if it is continuous at every point of that set. Standard facts:

  • Sums, products and compositions of continuous functions are continuous; quotients too, where the denominator is nonzero.
  • Polynomials are continuous everywhere. Rational functions are continuous wherever the denominator is nonzero.
  • f = u + iv is continuous exactly when u and v are continuous functions of (x, y).
  • abs(z), Re z, Im z and z̄ are continuous everywhere.
  • The principal argument Arg z is continuous on the plane minus the closed negative real axis and 0. Along the negative real axis it jumps by 2π.

That last point is subtle and important. Consider points just above and just below -1: Arg(-1 + 0.001i) is about π, and Arg(-1 - 0.001i) is about -π. The function is discontinuous across this ray, although the underlying direction in the plane is perfectly smooth.

Python The jump of the argument

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The square roots above and below the cut are close to +i and -i, far apart, even though the points are nearly identical. This is the first appearance of a branch cut, a topic we revisit when we define the complex logarithm.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Does lim (z → 0) of conj(z)/z exist?

    Two paths give different values, so no limit exists.
  2. 2. If f = u + iv, when is f continuous at (x₀, y₀)?

    Convergence in the plane is componentwise, so f is continuous exactly when its real and imaginary parts are.
  3. 3. What is lim (z → ∞) of (2z + 1)/(z - 3i)?

    Dividing numerator and denominator by z gives (2 + 1/z)/(1 - 3i/z), which tends to 2.
  4. 4. Where is the principal argument Arg z discontinuous?

    Arg jumps from just below π to just above -π across the negative real axis.

Summary

  • A limit uses disks: for every ε there is a δ with 0 < abs(z - z₀) < δ implying abs(f(z) - L) < ε.
  • The limit must be the same along every path of approach; two different path values prove nonexistence.
  • f = u + iv has a limit or is continuous exactly when u and v do.
  • Polynomials are continuous everywhere; Arg z jumps across the negative real axis.

Next: The Complex Derivative