Skip to content
Tutorials Center
My learning

Topics

Lesson 19 of 40 Β· Membranes and Transport

Facilitated Diffusion and Active Transport

Learn how channel and carrier proteins help ions and glucose cross membranes, how pumps like sodium-potassium use ATP, and how to compare passive and active transport.

Ions and large polar molecules such as glucose cannot slip through the oily middle of the phospholipid bilayer. Yet cells need to take in glucose and control salt levels all the time. They use transport proteins built into the membrane. Some of these proteins just open a path for particles that are already moving down a gradient. Others use energy to push particles against it. This lesson explains both.

Passive versus active

  • Passive transport needs no energy from the cell (no ATP). Particles move down their concentration gradient. Simple diffusion, osmosis and facilitated diffusion are passive.
  • Active transport uses energy (usually ATP) to move particles against their concentration gradient, from low to high concentration.

Facilitated diffusion

In facilitated diffusion, particles still move down their concentration gradient, but they cross through a transport protein because they are too big, or are charged. There are two kinds:

  1. Channel proteins form a water-filled pore through the membrane. Many are gated: they open or close in response to a signal, such as a change in voltage or the arrival of a chemical. Different channels are specific for different ions, for example sodium or potassium. Aquaporins are channels for water.
  2. Carrier proteins bind a specific molecule on one side, change shape, and release it on the other side. A well-known example is the glucose transporter family (GLUT) which lets glucose into many body cells.

Facilitated diffusion has some typical features:

  • It is specific: each protein handles one type of molecule or ion.
  • It saturates: when every carrier is busy, adding more of the substance does not make it go faster. Channels and carriers can be blocked by certain chemicals.
  • It requires no ATP and goes only down the gradient.

The next TryIt compares simple diffusion, which keeps increasing in proportion to the gradient, with carrier-mediated transport, which levels off when the carriers are all busy. The formula for the carrier curve is a standard shape used in biochemistry, and the numbers are invented to show the idea.

Python Saturation of carrier proteins (model)

Press Run (or Ctrl + Enter) to see the result here.

Program input Β· what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The carrier column rises and then flattens close to 10. The numbers are a model, not measurements, and the units are arbitrary.

Active transport

Active transport is carried out by pump proteins (also called carrier proteins that use energy). The pump binds the particle, a molecule of ATP is split to release energy, the protein changes shape and releases the particle on the other side, against its gradient.

Features of active transport:

  • It needs ATP, so it stops if respiration is stopped, for example with a poison such as cyanide.
  • It works against the gradient: it can build up high concentrations inside a cell.
  • It is specific and shows saturation.
  • Cells that do a lot of active transport have many mitochondria.

The sodium-potassium pump

The sodium-potassium pump is found in the membrane of almost all animal cells. With each cycle powered by one ATP, it moves:

  • 3 sodium ions (Na⁺) out of the cell, and
  • 2 potassium ions (K⁺) into the cell.

That keeps sodium low and potassium high inside the cell, and makes the inside slightly negative compared with the outside. This electrical difference (the membrane potential) is essential for nerve signals and muscle contraction. In nerve cells, running this pump takes a large share of the cell's energy.

flowchart LR
    A["Inside the cell<br/>low Na+, high K+"] -->|"pump uses 1 ATP"| B["3 Na+ pushed out"]
    C["Outside the cell<br/>high Na+, low K+"] -->|"pump uses 1 ATP"| D["2 K+ pulled in"]

The sodium-potassium pump moves both ions against their gradients.

Python Count the pump's work

Press Run (or Ctrl + Enter) to see the result here.

Program input Β· what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Because three positive charges leave and only two enter each cycle, the pump makes the inside more negative as well.

Cotransport

Some cells use the sodium gradient created by the pump to take in other molecules. In the lining of your small intestine, a protein moves a sodium ion and a glucose molecule together into the cell. The sodium goes down its gradient, and that supplies the energy to drag glucose in even when the glucose concentration inside is higher. This is called cotransport or secondary active transport: it does not use ATP directly, but depends on the pump that does.

Comparing the methods

Feature Simple diffusion Facilitated diffusion Active transport
Direction Down gradient Down gradient Against gradient
Energy (ATP) No No Yes
Protein needed No Yes (channel or carrier) Yes (pump)
Specific No Yes Yes
Saturates No Yes Yes
Example Oxygen into cells Glucose via GLUT; ions through channels Na⁺/K⁺ pump; mineral ions into root hairs

Plants use active transport in root hair cells to absorb mineral ions, such as nitrate, from soil where the concentration is lower than inside the cell.

Python Which transport method?

Press Run (or Ctrl + Enter) to see the result here.

Program input Β· what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Do not say "active transport moves things from high to low". Active transport goes from low to high, against the gradient. If a question says that a substance moves from low to high concentration, that is a clue that energy was used.

Check your understanding

Quick check Β· 4 questions

of 4 answered You scored / 4 Β· perfect!

  1. 1. Which type of transport needs ATP?

    Active transport uses energy from ATP to move substances against a gradient.
  2. 2. What do carrier proteins do in facilitated diffusion?

    Facilitated diffusion is passive; the carrier lets the molecule through but gives no extra energy.
  3. 3. In one cycle of the sodium-potassium pump, how many ions move?

    The pump moves three sodium ions out and two potassium ions in for each ATP.
  4. 4. A cell takes in a mineral ion even though its concentration is higher inside. The process is probably

    Movement against the gradient requires energy, so it is active transport.

Summary

  • Facilitated diffusion uses channel or carrier proteins and is passive, specific and saturable.
  • Active transport uses pump proteins and ATP to move particles against their gradient.
  • The sodium-potassium pump moves 3 Na⁺ out and 2 K⁺ in per ATP.
  • Cotransport uses a sodium gradient to bring in glucose without using ATP directly.
  • Cells with heavy active transport need many mitochondria.

Next: Endocytosis and Exocytosis