Skip to content
Tutorials Center
My learning

Topics

Lesson 14 of 38 · Polynomial Functions

Graphs and End Behavior of Polynomials

Sketch polynomial graphs using end behavior, zeros, multiplicity and the y-intercept, and learn how many turning points a polynomial can have.

You now know how to find the zeros of a polynomial. This lesson turns that information into a picture. You will predict what the graph does far to the left and right, where it meets the x-axis, and how it behaves at each zero, all without plotting hundreds of points.

Polynomial graphs are always smooth (no sharp corners) and continuous (no gaps or jumps). That is why a handful of key facts determines the overall shape.

End behavior

End behavior describes what f(x) does as x becomes very large in the positive direction (x → ∞) or very negative (x → -∞). For large |x|, the term with the highest power dominates. For f(x) = 2x³ - 100x² + 5, the cubic term is much bigger than the others once x is large (for example at x = 1000), so the graph behaves like 2x³.

So only the degree and the sign of the leading coefficient matter:

Degree Leading coefficient Left end Right end Example
even positive up up x², x⁴
even negative down down -x²
odd positive down up x³, x
odd negative up down -x³

Even degree: both ends go the same way. Odd degree: the ends go opposite ways.

Even degree, positive lead

Left end up
Right end up

Like x squared or x to the fourth.

1 / 4

Zeros and multiplicity

The zeros of f are the x-values where f(x) = 0. On the graph they are the x-intercepts. If f(x) = (x - 1)(x + 2)²(x - 4)³, the zeros are 1, -2 and 4 with multiplicities 1, 2 and 3.

  • Odd multiplicity (1, 3, ...): the graph crosses the axis. With multiplicity 1 it passes straight through; with multiplicity 3 it flattens as it passes (like x³ at the origin).
  • Even multiplicity (2, 4, ...): the graph touches the axis and turns back (like x² at the origin).

Turning points

A turning point is a place where the graph switches between rising and falling (a local maximum or minimum). A polynomial of degree n has at most n - 1 turning points. A cubic can have up to 2; a quartic up to 3. It may have fewer: x³ has none.

Sketching procedure

  1. Factor and find the zeros and their multiplicities.
  2. Find the y-intercept f(0).
  3. Use the degree and leading coefficient for the end behavior.
  4. Decide cross or touch at each zero.
  5. Test a value between zeros to confirm whether the graph is above or below the axis there (or use the sign pattern).

Example 1. Sketch f(x) = (x + 3)(x - 1)². Degree 3, leading coefficient +1: left end down, right end up. Zeros: -3 (multiplicity 1, crosses) and 1 (multiplicity 2, touches). Y-intercept: f(0) = 3(1) = 3. Starting from the lower left, the graph rises, crosses at -3, goes up through (0, 3), comes back down to touch the axis at 1, and then rises again.

Python Plot a factored polynomial

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Example 2. Sketch g(x) = -x²(x - 2)(x + 1). Degree 4, leading coefficient -1: both ends down. Zeros: 0 (multiplicity 2, touches), 2 and -1 (cross). Y-intercept is 0. Between -1 and 0 the factors give -x² < 0, (x - 2) < 0, (x + 1) > 0, so the product is positive: the graph is above the axis there.

Python Find zeros and sign pattern numerically

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The root list includes 0 twice, matching its multiplicity of 2 (numerical roots of repeated zeros may show tiny rounding errors).

From a graph to an equation

Reading the zeros and multiplicities lets you write a factored form. Suppose a graph crosses at -2, touches at 1 and crosses at 3, and passes through (0, -12). Start with f(x) = a(x + 2)(x - 1)²(x - 3). Use the point: -12 = a(2)(1)(-3) = -6a, so a = 2. The equation is f(x) = 2(x + 2)(x - 1)²(x - 3).

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is the end behavior of f(x) = -2x³ + x?

    Odd degree with a negative leading coefficient: up on the left, down on the right.
  2. 2. At a zero of multiplicity 2, the graph

    Even multiplicity means the factor squares, so the sign does not change and the graph bounces off the axis.
  3. 3. The maximum number of turning points for a degree 5 polynomial is

    At most n - 1 turning points, so 4.
  4. 4. What is the y-intercept of f(x) = (x - 2)(x + 5)(x - 1)?

    f(0) = (-2)(5)(-1) = 10.

Summary

  • End behavior depends on the degree and the sign of the leading coefficient.
  • Even degree: both ends in the same direction; odd degree: opposite directions.
  • Zeros of odd multiplicity cross the axis; even multiplicity touches and turns.
  • A degree n polynomial has at most n real zeros and n - 1 turning points.
  • Use zeros, the y-intercept and end behavior to sketch a graph.

Next: Simplifying Rational Expressions